IGL Ecoshine Finish F3
Paintwork Safe: ✔
PPF & Vinyl Safe: ✔
Surface: All paintwork, plastic and glass
Ecoshine Finish F3, is a nanotechnology based nano-abrasive based finishing formula with high performance polishing agents. The amount of cut is is excellent, especially when used with an aggressive pad with minimal concern of the ecoshine finish f3 drying out. It is highly efficient at creating a very deep, flawless finish and removal of P4000-P5000 sand scratches. The results are highly dependent on the hardness of the treated paints. It may be used both on oxidised surfaces and new fully dried paint. When using ecoshine finish f3 on softer paint system, finish f3 is able to correct without any hazing remaining.
Sizes : 300GM & 1KG
Paintwork Safe: ✔
PPF & Vinyl Safe: ✔
Surface: All paintwork, plastic and glass
Ecoshine Finish F3, is a nanotechnology based nano-abrasive based finishing formula with high performance polishing agents. The amount of cut is is excellent, especially when used with an aggressive pad with minimal concern of the ecoshine finish f3 drying out. It is highly efficient at creating a very deep, flawless finish and removal of P4000-P5000 sand scratches. The results are highly dependent on the hardness of the treated paints. It may be used both on oxidised surfaces and new fully dried paint. When using ecoshine finish f3 on softer paint system, finish f3 is able to correct without any hazing remaining.
Sizes : 300GM & 1KG
Product Data
Dilution: Ready to use
Carrier: Safe hydrocarbon
Consumption: 5-10gm /m2
VOC: 10gm/l
Abrasive: Non diminishing abrasive
Ingredients
Water: Diluent
Aluminium oxide: Abrasives
Hydrocarbons (C10-C13, isoalkanes, cyclics, <2% aromatics): Solvent
Lubricating oils (C15-C30, hydrotreated neutral oil-based): Lubricant
Castor oil: Lubricant
Sodium lauryl sulfate: Emulsifier